Introduction to Slew Drives
What is a slew drive?
If you are new to the industry, the following will serve as a brief introduction to slew drives. A slew drive is a type of gearbox that is specifically designed to handle high radial, axial, and moment loads. They are designed to withstand hold loads while also providing high rotational output torque. Slew drives consist of a worm gear mechanism, a metal ball bearing component, rubber seals, and sturdy housing to prevent environmental factors such as dirt, water, and dust from destroying the working components of the drive?
Slew drives operate fundamentally identical to worm gears. As a worm gear rotates, it translates rotational motion along its axis to rotary motion of the axis it is perpendicular to. The driven member (the worm wheel) consequently exhibits a decrease in speed and a proportional increase in torque from the worm gear. The output speed of the worm wheel is dependent upon the ratio of the threads on the worm gear to the number of teeth on the worm wheel.
A worm gear is often defined as “#-start worm”. This defines the number of 360-degree rotations of the worm gear that result in the advance of one tooth on the worm wheel. For example, the image below shows a 4-start worm. Consequently, if the worm wheel has 40 teeth, then there is a 10:1 decrease in speed from the worm gear to the worm wheel and a 1:10 increase in torque (because speed and torque are inversely proportional).
Slew drives come in several different configurations. A slew drive may be either single or double drive, meaning that they are driven by either one or two worm gears. A double drive configuration may be desirable because it allows the input load to be split between two power sources while maintaining the same output torque or speed. Additionally, slew drives may be powered by either electric motor or hydraulic motor.
Slew drives are used in industry across the globe. They are used in a variety of applications when it is desired to magnify the power of a motor into a controlled, high torqued output. Because of their ability to withstand (and hold) high loads and deliver high rotational torque, slew drives are used in a variety of industries such as the following:
Robotics: Slew drives allow for the controlled movements required in the automation industry.
Cranes and Lifts: Because of their ability to hold high loads, slew drives are commonplace in cranes and lifts.
Earth Moving and Heavy Machinery: The high torque output and controlled movements possible with slew drives make them ideal for earth moving equipment.
Solar Energy: Slew drives are used to help solar panels track with the direction of incoming rays of the sun that change position during the day.
Wind Energy: Due to their ability to hold high loads, slew drives are commonplace in wind turbines; allowing for the controlled turn of a turbine to face the oncoming wind.
Slew Drive Variable Specifications
When considering which type of slew drive would be most appropriate for a given application, there are several variable specifications that may be considered:
• Axial and radial loading requirements
• Desired output torque
• Gear ratio
• Tracking precision
• Weight and size
• Power supply